TMA is proud to introduce the Faro
The world's most trusted source for 3D measurement, imaging and realization
technology.
FARO develops and markets portable CMMs (coordinate measuring
machines) and 3D imaging devices to solve dimensional metrology
problems. Technology from FARO permits high-precision 3D measurement, imaging
and comparison of parts and compound structures within production
and quality assurance processes. The devices are used for inspecting components and
assemblies, production planning, documenting large volume spaces or
structures in 3D, and more. FARO's 3D measurement technology allows companies to maximize
efficiencies and improve processes.
3D Measurement Arm Technology
|
|
3D measurement arms, commonly known as articulating arms, are portable
coordinate measuring machines (CMMs) that determine and record the location
of a probe in 3D space and report the results through software. The name
derives from the actual look of the hardware, resembling a human arm with
a shoulder, elbow, forearm and a wrist. To ascertain the position of a probe,
the arms containproprietary glass discs in each joint, called encoders,
that calculate the probe's position as the arm moves freely throughtout it's
workspace.
The "human arm" and encoders
Radial reach of an arm when fully extended typically ranges from 2 to 6 feet.
In the CMM industry, arms are classified by the overall working volume, from 4 feet all the way to 12 feet.
The shorter the arm, the more accurate it is because there is less mechanical error linked to the length
of the sections. Arms may also be classified by the number of rotation axes.
Arms typically come with 6 axes of rotation, but if an arm has a handle at
the end of the unit to control a rotating wrist, it is considered a 7-axis
arm. One of the main benefits of using an arm is its portability. Compared to a
traditional CMM, arms are considerably smaller and lighter and thus, can be
taken to a part for inspection instead of the part traveling to the CMM,
minimizing machine downtime and quality control bottlenecks. Furthermore,
arms are designed to adapt to most temperature conditions so they can work
in a wide range of environments and are not confined to a temperature-controlled inspection room. The
accuracy of arm CMMs exceeds a majority of the hand tools often used to do
an inspector’s job. In addition to being substantially less expensive than
fixed CMMs, arm CMMs are also easier to use, with simple buttons on the
handle that are used to collect data.

7-axis arm with rotating “wrist”
Articulating Arm Applications
Typical applications for an articulated arm include:
- Dimensional Analysis: Collect information
- CAD-Based Inspection: Compare your part to a 3D CAD model in real time for instant
- feedback
- On-Machine Inspection: Utilize the portability of an arm and inspect a part before, during and after its production, all while mounted on a machine tool
- First Article Inspection: Review pre-production samples and compare against nominal data
- Alignment: Align tools and fixtures to the correct
- Reverse Engineering: Capture unique details
Articulating Arms vs Other Measurement Methods
For hundreds of years, hand measurement tools such as micrometers and
Vernier calipers were utilized to capture dimensions on parts. However,
due to their mechanical simplicity,
hand tools could only provide basic measurements such as widths, lengths,
and thicknesses. If complex dimensions such as form (flatness, circularity,
etc.) or hole-to-hole dimensions were desired, manual measurements would be
considered time-consuming. Although they provided the best accuracy and
precision at the time, hand tools often required skilled operators as manual
measurements were always susceptible to human error.

Dimensional analysis using an articulating arm
Coordinate measuring machines were then introduced in the 1960s for machinists and engineers to capture various geometries and measurements with higher accuracy than hand tools. Fixed CMMs typically consist of a measurement bed, a measurement probe (fixed to a bridge), a computer and measuring software to program the measurement probe. The probe can only move in three axes and only travel within the extent of the CMMs measurement bed. With the advancement of technology, articulating arm CMMs were invented to provide the same functionality as a fixed CMM, but also provide portability and flexibility as well. Though articulating arms may not have as fine an accuracy as fixed CMMs, they are lightweight (20 pounds or less), simple to operate, and far less expensive than a fixed CMM, all while providing the necessary accuracy for a wide variety of measurement applications.
Articulating Arms with Laser Line Scanners
Articulating arms may also be affixed with a laser line scanner. The laser scanner allows users to collect data on a part without direct contact, similar to painting a part with a spray gun. A laser scanner can quickly capture data (known as point clouds) at a high frequency, resulting
in millions of points that can later be turned into a CAD model. Benefits of scanning with a laser include speed in collecting the data, ease of use (just point and shoot), and less risk of impacting a part during a measurement.


Reverse engineering using an arm and laser scanner
Laser scanners used with articulating arms typically consist of a camera and a laser. The laser emitted from a laser scanner generally will be represented as a laser stripe or a moving laser dot that resembles a laser line. The laser line is then projected onto a part, and the camera captures information based on the position of the laser on the part, creating three-dimensional points. The points are then communicated back to a computer. Points can be collected anywhere from 10,000 to 500,000 points per second.
Applications for Articulating Arms with a Laser Line Scanner

Laser line scanner
Typical applications for an arm with a laser scanner include:
- • CAD-Based Inspection: Compare point cloud data to a CAD model in real time
- • Reverse Engineering: Collect three-dimensional information about a part to produce a 3D model
- • First Article Inspections: Capture details
- • Artifact Documentation: Archive digital information for research historical replication
Summary
Articulating arms combine the efficiency, reliability and accuracy of a traditional CMM with the portability and simplicity of hand tools. With the addition of a laser line scanner, parts that were once considered sophisticated or complex can now be easily inspected with an arm. Reduced scrap, faster inspections, less defects and an improvement in product quality are just some of the many benefits a company will experience when they implement an articulating arm for their inspection and manufacturing needs. These benefits ultimately result in a significant return on investment for a company..
View the Faro scanArm HD - handheld 3D Laser Scanner
http://www.faroscanarmhd.com/eng/
Edge Overview Video http://www2.faro.com/site/resources/share/660
Scan Arm HD Overview Video http://www.faroscanarmhd.com/eng/
In-Dept Webinar http://www2.faro.com/site/resources/share/2535
PowerPoint Presentation
https://farosocial.blob.core.windows.net/share/FARO%20Webinar%20Next%20Generation%20Scanning.pdf
Call TMA for more information at 1-210-338-8245